VGA Signal Generator

A board for mixing VGA signals with sound and all kind of other signals. A build in Arduino generates a VGA signal, too. Each colour has its own chanel, Red Green, Blue.
For the Arduino one could use the code of that project:

HSYNC and VSYNC signals are squared pulses of +5V, and the RGB signals take values in a continuous analog voltage range from +0V (absolutely dark) to +0.7V (maximum brightness).

Paper PCB

Arduino Connection

H-Sync – 68 Ohm – Pin 03
V-Sync – 68 Ohm – Pin 10
R – 470 Ohm – Pin 04
G – 470 Ohm – Pin 05
B – 470 Ohm – Pin 06


The VGA Signal Generator was designed by Wolfgang Spahn 2017.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License