This is an old revision of the document!
Table of Contents
Programming Board
That board can be used together with an AVR Programmer, or the Paper USBasp for burning bootloader or programming Atmega8, 126 or 328 chips.
Front:
Back:
Paper-PCB
Parts
- IC socket, 28 pin
- 4 loe current LEDs red, green, yellow
- 2 capacitors 100nF
- 2 capacitors 22pF
- resistors: 4x 2kOhm, 2x 1kOhm, 1x 10kOhm
- 10 pin socket
- 6 pins
License
The Programming Board was designed by Wolfgang Spahn 2013.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.