PB106 VC Oscillator

It's basicaly one halfe of the PB107 Sync VCO II. That's were you find the schematic, too, it is the same just without the sync poti.


Paper PCB

Parts

  • Resistors:
  • 1x 1 kOhm
  • 1x 4.7 kOhm
  • 1x 3.9 kOhm
  • 2x 10 kOhm
  • 5x 47 kOhm
  • 2x 100 kOhm
  • Capacitors:
  • 1x 10 nF
  • Electrolytic Capacitors:
  • 2x 10µF
  • Semiconductors:
  • 1x BC547 transistor
  • 1x LM358 OpAmp
  • 1x 1n4148 diode
  • Mechanical:
  • 2x IC socket, 8pins
  • 1x pin strip 1×9
  • 2x pin header, female 90° 1×3, 1×2
  • 2x pin header, male 90° 1×3, 1×2
  • 3x jumpers
  • 1x mini switch
  • Potentiometers:
  • 1x 10k
  • 1x 50k

License

This board is designed by Wolfgang Spahn.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License