Table of Contents
PB105 Saw Sync
There is a new version of this oscillator. Please use the PB101 Sync VCO instead.
That is an other version of the PB101 Sync VCO with a switch for shaping the waves. In square wave mode one can change to a super short duty cycle and in triagle mode one can switch the wave form from triangle to ramp. The board itself has some smal mistakes compared to the PB107 Sync VCO II but that makes the sound quit interesting.
Paper PCB
Parts
- Resistors:
- 1x 1 kOhm
- 1x 4.7 kOhm
- 4x 10 kOhm
- 10x 47 kOhm
- 4x 100 kOhm
- Capacitors:
- 1x 22 nF
- 1x 10 nF
- 2x 10µF
- Diodes:
- 1x 1N4148
- Semiconductors
- 2x BC547 transistor
- 2x LM358 OpAmp
- Mechanical:
- 2x IC socket, 8pins
- 1x pin strip 1×14
- 2x pin header, female 90° 1×3, 1×2
- 2x pin header, male 90° 1×3, 1×2
- 4x jumpers
- 3x mini switch
- Potentiometers:
- 2x 10k
- 1x 100k
License
The PB105 Saw Sync was designed by Wolfgang Spahn, 2017-20.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.