This is an old revision of the document!
Table of Contents
Voltage Controlled Oscillator
Schematic
For schematic please check the PB701 Electric Intonarumoriand the PB109 Voltage Controlled Oscillator II.
Paper PCB
Parts
- Resistors:
- 2x 10 kOhm
- 1x 12 kOhm
- 6x 47 kOhm
- 1x 100 kOhm
- Capacitors:
- 1x 3.3 nF (foil)
- Electrolytic Capacitors:
- 2x 10 µF
- Semiconductors:
- 1x OpAmp MCP6002
- 1x BC547 transistor
- Mechanical:
- 1x IC socket, 8 pin
- 2x pin strip 3 pin
- Potentiometers:
- 1x 100 kOhm
Acknowledge
License
The Voltage Controlled Oscillator was designed by Wolfgang Spahn 2020.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.