Differences
This shows you the differences between two versions of the page.
|
paper_bits:pb202_miditocv [2019/01/26 16:51] admin [Software] |
paper_bits:pb202_miditocv [2020/06/11 22:13] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | =====PB202 MIDI to CV ===== | ||
| - | |||
| - | That MIDI and MIDI over USB board give two 0 to 5V output signals, CV1 and CV2.\\ | ||
| - | The CCNumber are 1 and 2 on chanel 1. That can be easily modified in the code.\\ | ||
| - | {{:paper_bits:pb202_midi_to_cv_015617.jpg|}}\\ | ||
| - | |||
| - | ---- | ||
| - | ==== Paper-PCB ==== | ||
| - | {{:paper_bits:pb202_midi_to_vc_02.jpg?300|}}\\ | ||
| - | {{ :paper_bits:pb202_midi_to_vc_02.ai.zip |}} | ||
| - | |||
| - | ---- | ||
| - | ==== Software ==== | ||
| - | {{ :paper_bits:paperbits_miditocv_02.zip |}}\\ | ||
| - | |||
| - | ---- | ||
| - | ==== Parts ==== | ||
| - | * **Resistors:** | ||
| - | * 1x 220 Ohm | ||
| - | * 1x 330 Ohm | ||
| - | * 2x 470 Ohm | ||
| - | * 2x 1 KOhm | ||
| - | * 2x 1.2 KOhm | ||
| - | * 1x 2 KOhm | ||
| - | * 1x 3.3 KOhm | ||
| - | * 1x 3.9 KOhm | ||
| - | * 1x 8.2 KOhm | ||
| - | * 1x 10 KOhm | ||
| - | * 1x 47 KOhm | ||
| - | * 1x 100 KOhm | ||
| - | * 1x 220 KOhm | ||
| - | * 1x 1 MOhm | ||
| - | * **Capacitors:** | ||
| - | * 2x 22 pF | ||
| - | * 2x 1 nF | ||
| - | * 3x 100 nF | ||
| - | * 1x 150 nF | ||
| - | * **Electrolytic Capacitors:** | ||
| - | * 1x 1 µF | ||
| - | * 2x 10 µF | ||
| - | * **Semiconductors**: | ||
| - | * Arduino Pro Micro | ||
| - | * OpAmp LM358 | ||
| - | * Optocoupler 6N138 | ||
| - | * **Diodes** | ||
| - | * 1x 1N4148 | ||
| - | * 1x LED | ||
| - | * **Mechanical:** | ||
| - | * 1x IC socket, 28 pin | ||
| - | * 2x IC socket, 8 pin | ||
| - | * 1x pin strip 1x14pin | ||
| - | * 2x pin header, female 90° 1x3, 1x2 | ||
| - | * 2x pin header, male 90° 1x3, 1x2 | ||
| - | * 2x push button | ||
| - | * 3x jumpers | ||
| - | ~~socialite:icon facebook twitter googleplus reddit tumblr~~ | ||
| - | |||
| - | ---- | ||
| - | |||