The Paper-Duino-Mini is the super reduced version of the Paperduino-Uno. It's perfect to build it in fabric for wearables or to build into (inter)active pictures.
It comes with a small power regulator and an LED on pin 13 - but that's all.
Front:

Back:

Beside the USB to Serial adapter one needs an additional programming adapter for loading up the sketches.
Front:

Back:

All about uploading a sketch without a Serial-to USB adapter one can find here: The Arduino as a Serial Adapter
And all about the bootloader is here:Burning the Bootloader

paper-duino-mini_04.ai.zip

• Atmega328
• 1 low current LED
• voltage converter 78M05
• crystal 16MHz
• 1 elkos 100µF
• 2 capacitors 100nF
• 2 capacitors 22pF
• diode 1N4007
• resistors: 1x 2kOhm, 2x 470Ohm, 1x 10kOhm
• reset button
• pin headers & sockets
• battery clip

The Experimental VGA Processor was designed by Wolfgang Spahn 2016.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.