Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
avr_bootloader:bootloader [2020/03/23 18:54] admin [Burning the Bootloader with the AVRdude] |
avr_bootloader:bootloader [2020/03/23 19:05] admin [Burning the Bootloader with the AVRdude] |
||
|---|---|---|---|
| Line 92: | Line 92: | ||
| For setting the fuse bits one has to type: | For setting the fuse bits one has to type: | ||
| - | $ sudo avrdude -p m328p -c stk500v2 -P /dev/ttyACM0 -U lfuse:w:0xFF:m -U hfuse:w:0xDE:m -U efuse:w:0xFD:m | + | $ sudo avrdude -p m328p -c stk500v2 -P /dev/ttyACM0 -U lfuse:w:0xFF:m hfuse:w:0xDE:m efuse:w:0xFD:m |
| And for the bootloader: | And for the bootloader: | ||
| $ sudo avrdude -p m328p -c stk500v2 -P /dev/ttyACM0 -U flash:w:optiboot_atmega328.hex:i | $ sudo avrdude -p m328p -c stk500v2 -P /dev/ttyACM0 -U flash:w:optiboot_atmega328.hex:i | ||
| Line 100: | Line 100: | ||
| If one has a [[avr_bootloader:paper-avrisp_mk2|Paper-AVRISP mkII]] one hast to type in the terminal the following. For setting the fuse bits: | If one has a [[avr_bootloader:paper-avrisp_mk2|Paper-AVRISP mkII]] one hast to type in the terminal the following. For setting the fuse bits: | ||
| - | $ sudo avrdude -p m328p -c avrispmkII -P usb -U lfuse:w:0xFF:m -U hfuse:w:0xDE:m -U efuse:w:0xFD:m | + | $ sudo avrdude -p m328p -c avrispmkII -P usb -U lfuse:w:0xFF:m hfuse:w:0xDE:m efuse:w:0xFD:m |
| And for the actual bootloader: | And for the actual bootloader: | ||
| $ sudo avrdude -p m328p -c avrispmkII -P usb -U flash:w:optiboot_atmega328.hex:i | $ sudo avrdude -p m328p -c avrispmkII -P usb -U flash:w:optiboot_atmega328.hex:i | ||