Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
avr_bootloader:avrdude [2015/10/17 13:44] admin |
avr_bootloader:avrdude [2016/09/12 17:21] admin |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ---- | + | ===== AVRdude & Arduino ===== |
| - | **AVRdude** | + | |
| - | ---- | + | |
| - | AVRDUDE is a command line tool to program AVR chips. It runs in the background of the Arduino IDE. Sometimes it is necessary to erase a chip or set the fuse bits that's when the AVRdude comes handy. | + | AVRDUDE is a command line tool to program AVR chips. It runs in the background of the Arduino IDE. When burning the bootloader on an Arduino clone it is somtimes necessary to erase a chip or set the fuse bits manualy - that's when the AVRdude comes handy. |
| Dokumentations:\\ | Dokumentations:\\ | ||
| Line 45: | Line 43: | ||
| cd /usr/share/arduino/hardware/arduino/firmwares/atmegaxxu2/arduino-usbserial/ | cd /usr/share/arduino/hardware/arduino/firmwares/atmegaxxu2/arduino-usbserial/ | ||
| - | sudo avrdude -C /usr/share/arduino/hardware/tools/avrdude.conf -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:Arduino-usbserial-uno.hex:i | + | sudo avrdude -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:Arduino-usbserial-uno.hex:i |
| Burning Serial to USB on Sparkfun Atmega8u2 Breakout Board: | Burning Serial to USB on Sparkfun Atmega8u2 Breakout Board: | ||
| Line 52: | Line 50: | ||
| Burning Serial to Midi:\\ | Burning Serial to Midi:\\ | ||
| The hex file is here: [[http://hunt.net.nz/users/darran/weblog/52882/Arduino_UNO_MIDI_USB_version_02.html]] | The hex file is here: [[http://hunt.net.nz/users/darran/weblog/52882/Arduino_UNO_MIDI_USB_version_02.html]] | ||
| - | sudo avrdude -C /usr/share/arduino/hardware/tools/avrdude.conf -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:MIDI_Firmware/Arduino-usbmidi-0.2.hex:i | + | sudo avrdude -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:MIDI_Firmware/Arduino-usbmidi-0.2.hex:i |
| + | ---- | ||
| + | ~~socialite:icon facebook twitter googleplus reddit tumblr~~ | ||
| + | ---- | ||
| + | ~~DISCUSSION~~ | ||