Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
avr_bootloader:avrdude [2015/10/17 13:44] admin |
avr_bootloader:avrdude [2015/10/22 15:52] admin |
||
---|---|---|---|
Line 1: | Line 1: | ||
---- | ---- | ||
- | **AVRdude** | + | ==== AVRdude & Arduino ==== |
---- | ---- | ||
- | AVRDUDE is a command line tool to program AVR chips. It runs in the background of the Arduino IDE. Sometimes it is necessary to erase a chip or set the fuse bits that's when the AVRdude comes handy. | + | AVRDUDE is a command line tool to program AVR chips. It runs in the background of the Arduino IDE. When burning the bootloader on an Arduino clone it is somtimes necessary to erase a chip or set the fuse bits manualy - that's when the AVRdude comes handy. |
Dokumentations:\\ | Dokumentations:\\ | ||
Line 45: | Line 45: | ||
cd /usr/share/arduino/hardware/arduino/firmwares/atmegaxxu2/arduino-usbserial/ | cd /usr/share/arduino/hardware/arduino/firmwares/atmegaxxu2/arduino-usbserial/ | ||
- | sudo avrdude -C /usr/share/arduino/hardware/tools/avrdude.conf -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:Arduino-usbserial-uno.hex:i | + | sudo avrdude -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:Arduino-usbserial-uno.hex:i |
Burning Serial to USB on Sparkfun Atmega8u2 Breakout Board: | Burning Serial to USB on Sparkfun Atmega8u2 Breakout Board: | ||
Line 52: | Line 52: | ||
Burning Serial to Midi:\\ | Burning Serial to Midi:\\ | ||
The hex file is here: [[http://hunt.net.nz/users/darran/weblog/52882/Arduino_UNO_MIDI_USB_version_02.html]] | The hex file is here: [[http://hunt.net.nz/users/darran/weblog/52882/Arduino_UNO_MIDI_USB_version_02.html]] | ||
- | sudo avrdude -C /usr/share/arduino/hardware/tools/avrdude.conf -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:MIDI_Firmware/Arduino-usbmidi-0.2.hex:i | + | sudo avrdude -p m8u2 -c stk500v2 -P /dev/ttyACM0 -b115200 -U flash:w:MIDI_Firmware/Arduino-usbmidi-0.2.hex:i |