Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
paper_bits:pb202_miditocv [2019/01/26 17:05]
admin
paper_bits:pb202_miditocv [2019/01/26 17:12] (current)
admin
Line 1: Line 1:
 =====PB202 MIDI to CV ===== =====PB202 MIDI to CV =====
  
-That MIDI and MIDI over USB board give two 0 to 5V output signals, CV1 and CV2.\\ +That MIDI and MIDI over USB board give four 0 to 5V output signals, ​CV1, CH2, CV3 and CV4. CV1 and CV2 are filtered.\\ 
-The CCNumber are 1 and 2 on chanel 1. That can be easily modified in the code.\\+The CCNumber are 12, 3 and 4 on chanel 1. That can be easily modified in the code.\\ 
 +The board also outputs a trigger signal on an clock impulse. The poti is used as a clock divider.\\ 
 {{:​paper_bits:​pb202_midi_to_cv_015617.jpg|}}\\ {{:​paper_bits:​pb202_midi_to_cv_015617.jpg|}}\\
  
 For uploading code on the Arduino the Midi In jumper has to be off. One has to set the jumper for getting Midi in on the Arduino.\\ For uploading code on the Arduino the Midi In jumper has to be off. One has to set the jumper for getting Midi in on the Arduino.\\
  
-The funktion of the potentiometer is not implemented in the code yet!\\ 
  
 ---- ----
Line 36: Line 37:
   * 1x 1N4148   * 1x 1N4148
   * **Potentiometer:​**   * **Potentiometer:​**
-  * 1x 100 kOhm (not yet implemented!)+  * 1x 100 kOhm
   * **Mechanical:​**   * **Mechanical:​**
   * 1x IC socket, 28 pin   * 1x IC socket, 28 pin