This is an old revision of the document!
Table of Contents
PB401 VC Echo
The echo module based on the digital delay chip PT2399. The echo could be changed with a poti, the delay with CV or with a poti, too.
Hardware
Schematic
Paper-PCB
Parts
- Resistors:
- 1x 47 Ohm
- 1x 1kOhm
- 1x 4,7 kOhm
- 1x 5,6 kOhm
- 5x 10 kOhm
- 2x 15 kOhm
- 1x 18 kOhm
- 1x 20 kOhm
- 1x 100 kOhm
- Capacitors:
- 2x 560 pF (foil)
- 1x 3300 pF (foil)
- 1x 3900 pF (foil)
- 1x 10 nF (foil)
- 5x 100 nF (foil)
- 2x 4,7 µF ELKO
- 1x 10 µF ELKO
- 1x 47 µF ELKO
- Semiconductors:
- digital delay PT 2399
- optocoupler H11F1
- Mechanical:
- 1x IC socket, 16 pin
- 1x IC socket, 6 pin
- 1x Pin-Strip 1×7
- 1x Right Angle Pin-Strip / Female-Socket Header 1×5
- 1x Right Angle Pin-Strip 0,1 /Male 1×5
- 3x jumpers
- Potentiometers:
- 1x 10k
- 1x 50k
~~socialite:icon facebook twitter googleplus reddit tumblr~~
~~DISCUSSION~~