This is an old revision of the document!

== USBasp Board ==============================

That board based on the USBasp Board of Thomas Fischl. The serial connection (RX and TX) were removed. A jumper for 3.6V was added.

== Paper-PCB ============================================

paper-usbasp_20_pub.xcf.zip

== Components ===========================================

• Atmega8 or Atmega48
• IC socket, 28 pin
• 2 LEDs red, green
• 1 elkos 4,7µF
• 1 capacitors 100nF
• 2 capacitors 22pF
• 2 diodes 1N4007
• 2 z-diodes 3.6V
• resistors: 1x 2,2kOhm, 2x 68Ohm, 1x 10kOhm, 3x 270Ohm
• USB socket
• 10 pin socket
• pins and jumper

===========================================================