This is an old revision of the document!
Table of Contents
PaperCocoMake1
The PaperCocoMake1 in an Arduino board based on Paper PCB and an ATtiny85 chip. It is the paper version of the CocoMake1.
For code and the Arduino IDE mod please follow the CocoMake7 webside.
Here you find the PaperCocoMake7 and the PaperTiny.
Paper PCB
schematic
It's the one from https://cocomake7.github.io/#, I just used 2k resistors for the LED resistors..
Parts
- Resistors:
- 2x 2 kOhm
- 1x 1.5 kOhm
- 1x 47 kOhm
- 2x 68 Ohm
- Capacitors:
- 1x 100 nF
- Diodes:
- 2x Z-Diode 3,3V
- Semiconductors
- 2x Standart LED
- Mechanical:
- 1x IC socket, 8pins
- 1x Pin-Strip male 1×2
- 2x Pin-Strip female 1×4
- jack socket
~~socialite:icon facebook twitter googleplus reddit tumblr~~