This is an old revision of the document!
Table of Contents
Sound Board
This is a simple audio board for playing and generating sound with the Arduino.
Code
With a piece of wire at the analog input you can make a simple theremin:
stereo_theremin.zip
Parts
- 2 elko 1µF
- 2 capacitors 100nF
- resistors: 2x 1kOhm, 2x 9.1kOhm
- stereo jack socket 3.5mm
License
The Sound Board was designed by Wolfgang Spahn 2012.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
