This is an old revision of the document!


== Motor Control Board ===================================

This board is for two DC motors (5-40V) in combination with an Arduino. You can control each speed with one PWM and each direction with 2 digital ports.
- Forward:…ON - OFF
- Stop:……OFF - OFF
- Backward:..OFF - ON
Two control LEDs indicates the PWM. And the other four indicates the direction of the motors.
With the jumper one can power the output with an external power supply or - for testing purposes only - via the arduino.

== Paper-PCB ============================================ motor_control_board_21.xcf.zip

== Program ============================================ Test Program

== Components ===========================================

  • 1 H-Brigh Driver L298 N
  • 6 standard LEDs
  • 1 elkos 2200µF
  • 2 capacitors 100nF
  • 8 diodes 1N4007
  • resistors: 2x 2,2kOhm, 2x 220Ohm
  • Jumper

=========================================================

Motor-Control-Board