This is an old revision of the document!
SMD Solder Manual
For SMD soldering one needs rosin (also called colophony)
It helps the molten metal to flow and making a better connection. Because SMDs are super small a magnifying glass could help a lot, too.
And certainly one needs all the standart solder tools.
1. One need a protoboard for the SMD chip.
2. And the chip.
3. Put rosin on the solder pats.
4. And some solder, too.
5. Check with the magnifying glass if there a no briges.
6. Again rosin.
7. Bring the chip in the right possition.
8. Solder one leg, check if the possition is OK.