This is an old revision of the document!


Experimental VGA Processor

This VGA board makes mixing of all kind of signals possible. One VGA connector including the Sync signal is on the board. For other inputs there are three potentiometer and three extra pins reserved. That's how the Experimental VGA Processor could be used to blend two (synced) VGA sources.

If one use long pin strips for the input connection the Experimental VGA Processor could be easily combined with a bread board. In this combination it's a perfect experimental setup to explore and mix all kind of signals.


Paper PCB

Parts

  • Resistors:
  • 15x 75 Ohm
  • 1x 330 Ohm
  • 6x 1.5 kOhm
  • 6x 16 kOhm
  • Capacitors:
  • 3x 100 pF
  • 3x 100 nF
  • 2x 4.7 µF
  • Diodes:
  • 1x LED
  • Semiconductors
  • 1x LT1260 OpAmp
  • 1x RKZE 0505D DC-CD converter
  • Mechanical:
  • 1x IC socket, 16pins
  • 2x VGA sockets
  • 1x micro USB connector board
  • 9x 2pin strip
  • 1x 3pin strip
  • 1x 5pin strip
  • 4x jumpers
  • Potentiometers:
  • 6x 100 kOhm

License

These boards are designed by Wolfgang Spahn.
They are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License