This is an old revision of the document!

Table of Contents

Experimental VGA Processor

This VGA board makes mixing all all kind of signals possible. But it also could be used to blend two (synced) VGA sources.

If one use long pin strips for the input connection the Experimental VGA Processor could be easily used together with a bread board. In this combination it's a perfect experimental setup to explore and mix all kind of signals.

Paper PCB


experimental_vga_processor_22.zip

Parts

  • Resistors:
  • 15x 75 Ohm
  • 1x 330 Ohm
  • 6x 1.5 kOhm
  • 6x 16 kOhm
  • Capacitors:
  • 3x 100 pF
  • 3x 100 nF
  • 2x 4.7 µF
  • Diodes:
  • 1x LED
  • Semiconductors
  • 1x LT1260 OpAmp
  • 1x RKZE 0505D DC-CD converter
  • Mechanical:
  • 1x IC socket, 16pins
  • 2x VGA sockets
  • 1x micro USB connector board
  • 9x 2pin strip
  • 1x 3pin strip
  • 1x 5pin strip
  • 4x jumpers
  • Potentiometers:
  • 6x 100 kOhm

License

These boards are designed by Wolfgang Spahn.
They are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License