This is an old revision of the document!


PB702 MIDI Synthesizer

The MIDI Synthesizer gives the possiblility to connect your Paper Bits to your Keyboard. It is polyphonic up to six notes and has three different waveforms: square, triangle and sine.
It's basicaly an Arduino klone running a small program based on the wonderfull Mozzi librarie.

For burning the bootloader look here:
AVR & Bootloader
For uploading the program one needs an USB to Serial adapter or an Arduino:
The Arduino as a Serial Adapter


Paper PCB

Parts

  • Resistors:
  • 1x 220 Ohm
  • 1x 330 Ohm
  • 2x 470 Ohm
  • 2x 1 KOhm
  • 2x 1.2 KOhm
  • 1x 2 KOhm
  • 1x 3.3 KOhm
  • 1x 3.9 KOhm
  • 1x 8.2 KOhm
  • 1x 10 KOhm
  • 1x 47 KOhm
  • 1x 100 KOhm
  • 1x 220 KOhm
  • 1x 1 MOhm
  • Capacitors:
  • 2x 22 pF
  • 2x 1 nF
  • 3x 100 nF
  • 1x 150 nF
  • Electrolytic Capacitors:
  • 1x 1 µF
  • 2x 10 µF
  • Semiconductors:
  • Atmega 328P-PU
  • OpAmp MCP 6002
  • Optocoupler 6N138
  • Cristal
  • 1x 16 MHz
  • Diodes
  • 1x 1N4148
  • 1x LED
  • Mechanical:
  • 1x IC socket, 28 pin
  • 2x IC socket, 8 pin
  • 1x pin strip 1x14pin
  • 2x pin header, female 90° 1×3, 1×2
  • 2x pin header, male 90° 1×3, 1×2
  • 2x push button
  • 3x jumpers

Software