This is an old revision of the document!
PB401 VC Echo
The echo and delay module based on the digital delay chip PT2399. The amount of echo could be changed with a potientiometer. The length of the delay with CV (0 to 5V) or with a poti.
The board was developed by Wolfgang Spahn in 2017. With the friendly support of his intern at that time Ioana Vreme Moser.
Hardware
Schematic
Paper-PCB
Parts
- Resistors:
- 1x 1 kOhm
- 1x 4,7 kOhm
- 1x 5,6 kOhm
- 5x 10 kOhm
- 2x 15 kOhm
- 1x 18 kOhm
- 1x 20 kOhm
- 1x 100 kOhm
- Capacitors:
- 2x 560 pF (foil)
- 1x 3300 pF (foil)
- 1x 3900 pF (foil)
- 1x 10 nF (foil)
- 1x 39 nF (Foil)
- 5x 100 nF (foil)
- Electrolytic Capacitors:
- 2x 4,7 µF
- 1x 10 µF
- 1x 47 µF
- Semiconductors:
- digital delay PT 2399
- optocoupler H11F1
- Mechanical:
- 1x IC socket, 16 pin
- 1x IC socket, 6 pin
- 1x pin strip 1×9
- 2x pin header, female 90° 1×3, 1×2
- 2x pin header, male 90° 1×3, 1×2
- 3x jumpers
- Potentiometers:
- 1x 10k
- 1x 50k
License
The PB401 VC Echo was designed by Wolfgang Spahn, 2017-20.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.