Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
avr_bootloader:avrdude [2015/10/17 13:46]
admin
avr_bootloader:avrdude [2020/06/11 22:13] (current)
Line 1: Line 1:
----- +===== AVRdude ​& Arduino =====
-**AVRdude** +
-----+
  
-AVRDUDE is a command line tool to program AVR chips. It runs in the background of the Arduino IDE. Sometimes ​it is necessary to erase a chip or set the fuse bits that's when the AVRdude comes handy.+AVRDUDE is a command line tool to program AVR chips. It runs in the background of the Arduino IDE. When burning the bootloader on an Arduino clone it is somtimes ​necessary to erase a chip or set the fuse bits manualy - that's when the AVRdude comes handy.
  
 Dokumentations:​\\ Dokumentations:​\\
Line 54: Line 52:
   sudo avrdude -p m8u2 -c stk500v2 -P /​dev/​ttyACM0 -b115200 -U flash:​w:​MIDI_Firmware/​Arduino-usbmidi-0.2.hex:​i   sudo avrdude -p m8u2 -c stk500v2 -P /​dev/​ttyACM0 -b115200 -U flash:​w:​MIDI_Firmware/​Arduino-usbmidi-0.2.hex:​i
  
 +----
 +==== License ====
  
 +This manual was made by **Wolfgang Spahn** 2011-20.\\
 +It is licensed under a [[http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"​|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].
  
 +<​html>​
 +<a rel="​license"​ href="​http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"><​img alt="​Creative Commons License"​ style="​border-width:​0"​ src="​https://​i.creativecommons.org/​l/​by-nc-sa/​4.0/​88x31.png"​ /></​a> ​
 +</​html>​
 +
 +----