This is an old revision of the document!


Programming the ATtiny

Here is a short manual for programming an ATtiny with the Arduino IDE.

First install the ATtiny support for the Arduino IDE.
1.In the preferences dialog of the Arduino IDE type in the “Additional Boards Manager URLs” field that URL:

https://raw.githubusercontent.com/damellis/attiny/ide-1.6.x-boards-manager/package_damellis_attiny_index.json

2. In the board manager install the ATtiny librarie by David A. Mellis (https://github.com/damellis/attiny)
3. Connect the ATtiny with your AVRISP programmer like that:

4. Upload the blink programm (use pin 0 instead of pin13).


Knowlegde