This is an old revision of the document!
Table of Contents
Programming the ATtiny
A short manual for programming an ATtiny with the Arduino IDE.
Install the ATtiny support for the Arduino IDE (High-Low Tech - Programming an ATtiny)
In the preferences dialog type in the “Additional Boards Manager URLs” field that URL:
https://raw.githubusercontent.com/damellis/attiny/ide-1.6.x-boards-manager/package_damellis_attiny_index.json
In the board manager install the ATtiny librarie by David A. Mellis (https://github.com/damellis/attiny)
Pin connection of the ATtiny 85 or 45
