This is an old revision of the document!



Simple-Input-Board


That board is a simple control board for two DC motors (5-35V) or two other loads in combination with an Arduino. You can control each speed separately with one PWM output (pin 3,5,6,9,10,11). Every PWM has his own control LED, too.


Paper-PCB

Simpl-Output-Board_v3.1

Simpl-Output-Board_v3.1


Components

  • 2 MOS-FET RFD 3055
  • 2 standard LEDs
  • 2 diodes 1N4007
  • resistors: 2 x 220 Ohm, 2 x 100 Ohm

—-