This is an old revision of the document!
== Simple-Input-Board ===================================
That board is a simple control board for two DC motors (5-35V) or two other loads in combination with an Arduino. You can control each speed separately with one PWM output (pin 3,5,6,9,10,11). Every PWM has his own control LED, too.
== Paper-PCBs ===========================================
== Components ===========================================
- 2 MOS-FET RFD 3055
- 2 standard LEDs
- 2 diodes 1N4007
- resistors: 2 x 220 Ohm, 2 x 100 Ohm
=========================================================