Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
analog_computer:confetti102_chua_diode [2020/05/09 18:13]
admin [Confetti102 Chua Diode]
analog_computer:confetti102_chua_diode [2020/06/11 22:13] (current)
Line 1: Line 1:
-===== Confetti102 ​Chua's Diode =====+===== Confetti 102 Chua's Diode =====
  
 That's a [[https://​en.wikipedia.org/​wiki/​Chua%27s_diode|Chua'​s Diode]] board for the analog computer [[analog_computer:​analog_computer_main|Confetti]].\\ That's a [[https://​en.wikipedia.org/​wiki/​Chua%27s_diode|Chua'​s Diode]] board for the analog computer [[analog_computer:​analog_computer_main|Confetti]].\\
 With the jumper set one can connect the output to the common ground, if no jumper is used one can use the output connector instead.\\ With the jumper set one can connect the output to the common ground, if no jumper is used one can use the output connector instead.\\
 In combination with the [[analog_computer:​confetti101_gyrator|Confetti101 Gyrator]] one can build a [[https://​en.wikipedia.org/​wiki/​Chua%27s_circuit|Chua'​s Oscillator]].\\ In combination with the [[analog_computer:​confetti101_gyrator|Confetti101 Gyrator]] one can build a [[https://​en.wikipedia.org/​wiki/​Chua%27s_circuit|Chua'​s Oscillator]].\\
 +
 +{{:​analog_computer:​chua_s_circuit_oscilloscope_134541.jpg?​600|}}\\
 +[[https://​dernulleffekt.de/​doku.php?​id=analogcomputation:​01_chuascircuit#​analog_computation_01_-_chua_s_circuit|Analog Computing 01 - Chua's Circuit]]\\
  
 ---- ----
 ==== Paper PCB ==== ==== Paper PCB ====
-{{:​analog_computer:​confetti102_chua_diode_04.jpg?​400|}}\\ +{{:​analog_computer:​confetti102_chua_diode_05.jpg?​400|}}\\ 
-{{ :​analog_computer:​confetti102_chua_diode_04.zip |}}\\+{{ :​analog_computer:​confetti102_chua_diode_05.zip |}}\\ 
 + 
 +---- 
 +==== Parts ==== 
 +  * **Resistors:​** 
 +  * 2x 330 Ohm 
 +  * 2x 3.3 kOhm 
 +  * 2x 47 kOhm 
 +  * **Diodes:​** 
 +  * 2x 1N4148 
 +  * **Semiconductors** 
 +  * 1x TL072 OpAmp 
 +  * **Mechanical:​** 
 +  * 1x IC socket, 8pins 
 +  * 1x 2 pin strip 
 +  * 3x 2 pin header, female  
 +  * 2x pin header, female 90° 1x3, 1x2 
 +  * 2x pin header, male 90° 1x3, 1x2 
 +  * 1x jumpers 
 +  * **Trimpotentiometer:​** 
 +  * 1x 5 kOhm
  
 ---- ----
 ==== License ==== ==== License ====
  
-The Confetti102 Chua Diode was designed by **Wolfgang Spahn** 2015-19.\\+The Confetti102 Chua Diode was designed by **Wolfgang Spahn** 2015-20.\\
 It is licensed under a [[http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"​|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]]. It is licensed under a [[http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"​|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].