===== The Arduino as a Serial Adapter ===== If you don't have any USB to Serial adapter you can use your Arduino (Arduino-Uno or older) for that purpose. After removeing the chip on the board connect the pins like seen on the picture: * +5V to +5V * Ground to Ground * Pin1 to DTR * RX to RX * TX to TX {{ :arduino_clones:arduino_as_serial_to_usb_adapter_wspahn.jpg?direct&450 |}} ---- ==== License ==== This manual was made by **Wolfgang Spahn** 2011.\\ It is licensed under a [[http://creativecommons.org/licenses/by-nc-sa/4.0/"|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].

----