===== Paper-Duino-Mini ===== {{:arduino_clones:paper-duino-mini.jpg?400|}}\\ The Paper-Duino-Mini is the super reduced version of the Paperduino-Uno. It's perfect to build it in fabric for wearables or to build into (inter)active pictures.\\ It comes with a small power regulator and an LED on pin 13 - but that's all.\\ Front:\\ {{:arduino_clones:paper-duino-mini_front.jpg?200|}}\\ Back:\\ {{:arduino_clones:paper-duino-mini_back.jpg?200|}}\\ Beside the USB to Serial adapter one needs an additional programming adapter for loading up the sketches.\\ Front:\\ {{:arduino_clones:paper-duino-mini-adapter_front.jpg?200|}}\\ Back:\\ {{:arduino_clones:paper-duino-mini-adapter_back.jpg?200|}}\\ All about uploading a sketch without a Serial-to USB adapter one can find here: [[arduino_clones:serial_adapter|The Arduino as a Serial Adapter]]\\ And all about the bootloader is here:[[avr_bootloader:bootloader|Burning the Bootloader]]\\ {{:arduino_clones:paper-duino-mini_adapter.jpg?400|}} ---- ==== Paper-PCB ==== {{:arduino_clones:paper-duino-mini_04.png?200|}}\\ {{:arduino_clones:paper-duino-mini_04.ai.zip|}}\\ ---- ==== Parts ==== * Atmega328 * 1 low current LED * voltage converter 78M05 * crystal 16MHz * 1 elkos 100µF * 2 capacitors 100nF * 2 capacitors 22pF * diode 1N4007 * resistors: 1x 2kOhm, 2x 470Ohm, 1x 10kOhm * reset button * pin headers & sockets * battery clip ---- ==== Paper-Duino-Mini ==== The Experimental VGA Processor was designed by **Wolfgang Spahn** 2016.\\ It is licensed under a [[http://creativecommons.org/licenses/by-nc-sa/4.0/"|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].

----