===== Paperduino-Duemilanove ===== The Paperduino-Duemillenova is a [[http://arduino.cc/en/Main/ArduinoBoardDuemilanove|Arduino Duemilanove]] clone and is made with a Paper-PCB. For the USB to Serial adapter a modified [[http://arduino.cc/en/Main/MiniUSB|Arduino-MiniUSB]] is used (one extra pin at DTR): {{:arduino_clones:usb_to_serial_ftdi_0893.jpg?direct&200|}} To [[avr_bootloader:bootloader|burn the bootloader]] one need a modified ISP connector. {{ :arduino_clones:paperduino_wspahn.jpg?direct&450 |}} ---- ==== Paper-PCBs ==== {{:arduino_clones:paperduino_13_wspahn.jpg?direct&300|Paperduino-Duemilanove_v1.3}} {{:arduino_clones:paperduino_13.xcf.zip|Paperduino-Duemilanove_v1.3}} ---- ==== Schematic ==== Here one finds the original [[http://arduino.cc/en/uploads/Main/arduino-duemilanove-schematic.pdf|schematic]]. ---- ==== Parts ==== * Atmega328 or Atmega168 with IC socket * 2 lowcurrent LEDs * voltage converter 78M05 * crystal 16MHz * 2 elkos 100µF * 4 capacitors 100nF * 2 capacitors 22pF * diode 1N4007 * resistors: 4x 1kOhm, 1x 10kOhm * reset button * header * jumper ---- ==== License ==== The Paperduino-Duemilanove was designed by **Wolfgang Spahn** 2011.\\ It is licensed under a [[http://creativecommons.org/licenses/by-nc-sa/4.0/"|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].

----