===== Simple-Output-Board ===== That board is a simple control board for two DC motors (5-35V) or two other loads in combination with an Arduino. You can control each speed separately with one PWM output (pin 3,5,6,9,10,11). Every PWM has his own control LED, too. {{ :arduino_boards:output-board_0888_wspahn.jpg?direct&300 |}} {{ :arduino_boards:output-board_back_0889_wspahn.jpg?direct&300 |}} ---- ==== Paper-PCB ==== {{:arduino_boards:simpl-output-board_31.jpg?direct&100|Simpl-Output-Board_v3.1}} {{:arduino_boards:simpl-output-board_31.xcf.zip|Simpl-Output-Board_v3.1}} ---- ==== Parts ==== * 2 MOS-FET RFD 3055 * 2 standard LEDs * 2 diodes 1N4007 * resistors: 2 x 220 Ohm, 2 x 100 Ohm ---- ==== License ==== The Simple-Output-Board was designed by **Wolfgang Spahn** 2011.\\ It is licensed under a [[http://creativecommons.org/licenses/by-nc-sa/4.0/"|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].

----