===== Duino-Bluetooth-Board ====== {{:arduino_boards:duino-mini-bluetooth_173508.jpg?400|}}\\ It's a Bluetooth board for the Paper-Duino-Uno or the Duino-Mini. It's based on the Bluetooth Module RS232/TTL HC-05. It is a Master and Slave integrated Bluetooth serial module:\\ {{:arduino_boards:module_hc-05_184729.jpg?200|}}\\ The default setting for the serial port is: 9600, N, 8,1 and the password is: 1234.\\ There are two versions, one for the [[arduino_clones:paperduino-uno|Paperduino-UNO]] and one for the [[arduino_clones:paper-duino-mini|Paper-Duino-Mini]]. For the UNO board on has to modifier the power jumper that the Blutooth board is powered over the external power.\\ Front:\\ {{:arduino_boards:duino-mini-bluetooth_front_160111.jpg?200|}}\\ Back:\\ {{:arduino_boards:duino-mini_bluetooth_back_160100.jpg?200|}}\\ ---- ==== Schematic ==== {{:arduino_boards:schematic_bluetooth-board.jpg?400|}}\\ ---- ==== Paper-PCB ==== **For the Paper-Duino-Mini and the Fabric-Duino:**\\ {{:arduino_boards:duino-mini-bluetooth_02.jpg?200|}}\\ {{:arduino_boards:duino-mini-bluetooth_02.ai.zip|}}\\ **And for the Paperduino-UNO:**\\ {{:arduino_boards:paper-duino-bluetooth_01.jpg?200|}}\\ {{:arduino_boards:paper-duino-bluetooth_01.ai.zip|}}\\ ---- ==== Parts ==== * HC-05 Module * Diode 1N4007 * Cap 100nF * Resistors: 2x 470 Ohm, 1x 1 Kohm, 1x 2kOhm, 1x 10 kOhm * 2x LED * Connector ---- ==== License ==== The Duino-Bluetooth-Board was designed by **Wolfgang Spahn** 2016.\\ It is licensed under a [[http://creativecommons.org/licenses/by-nc-sa/4.0/"|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].

----