Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
raspberry_boards:paperduinopi_hat [2016/07/16 22:15]
admin [Paper PCB]
raspberry_boards:paperduinopi_hat [2020/06/11 22:13] (current)
Line 9: Line 9:
  
 ==== Paper PCB ==== ==== Paper PCB ====
-{{:​raspberry_boards:​paper-duino-pi_51.jpg?​400|}}+{{:​raspberry_boards:​paper-duino-pi_51.jpg?​400|}}\\
 {{:​raspberry_boards:​paper-duino-pi_51.ai.zip|}}\\ {{:​raspberry_boards:​paper-duino-pi_51.ai.zip|}}\\
 +
 +----
 +
 +==== Parts ====
 +  * Atmega328p
 +  * 28 pin IC socket
 +  * 4x low current LEDs
 +  * crystal 16MHz
 +  * 2x capacitors 100nF
 +  * 2x capacitors 22pF
 +  * capacitor 68nF
 +  * 2x Z-diode 3.3V
 +  * resistors: 2x 2kOhm, 4x 1kOhm, 1x 6.8kOhm
 +  * 2x reset button
 +  * one row headers, 2x8, 2x3, 1x4
 +  * a 2x8 pin header
  
 ---- ----
Line 28: Line 44:
   $ mkdir paper-duino-pi   $ mkdir paper-duino-pi
   $ cd paper-duino-pi   $ cd paper-duino-pi
-Download ​and unpack ​the files:+Download the files:
   $ wget http://​dernulleffekt.de/​programme/​paperduinopi_v05/​paper-duino-hat_01.tar.gz   $ wget http://​dernulleffekt.de/​programme/​paperduinopi_v05/​paper-duino-hat_01.tar.gz
-  ​$ tar -xvf paper-duino-pi_Pi2_Jessy.tar.gz+And unpack: 
 +  ​$ tar -xvf paper-duino-hat_01.tar.gz
 Run the setup: Run the setup:
   $ sudo chmod 755 setup   $ sudo chmod 755 setup
Line 49: Line 66:
 Go to your Paper-Duino-Pi folder Go to your Paper-Duino-Pi folder
   $ cd /​home/​pi/​paper-duino-pi   $ cd /​home/​pi/​paper-duino-pi
-Download ​and unzip the Python script, one for the button+Download the Python script: 
-  $ wget http://​www.dernulleffekt.de/​programme/​shutdown_and_blink_01.tar.gz+  $ wget http://​www.dernulleffekt.de/​programme/​paperduinopi_v05/​shutdown_and_blink_01.tar.gz 
 +And unpack it:
   $ tar xf shutdown_and_blink_01.tar.gz   $ tar xf shutdown_and_blink_01.tar.gz
 Change owner & rights Change owner & rights
-  $ sudo chown root:root shutdownbutton_hat.py +  $ sudo chown root:root shutdownbutton_hat.py blink_hat.py 
-  $ sudo chown root:​root ​blink_hat.py +  $ sudo chmod 755 shutdownbutton_hat.py blink_hat.py
-  $ sudo chmod 755 shutdownbutton_hat.py +
-  $ sudo chmod 755 blink_hat.py+
 Create the autostart: Create the autostart:
     $ sudo nano /​etc/​rc.local     $ sudo nano /​etc/​rc.local
 Write before "exit 0": Write before "exit 0":
-   # run reset and shutdown script +  printf ">>>>>>>>​ PAPER-DUINO-HAT 07_2016 http://​dernulleffekt.de\n" ​           
-   ​printf "Starts ​shutdown aund reset button on GPIO 22\n"​ +   
-   ​/​home/​pi/​paper-duino-pi/​shutdownbutton_hat.py &  +  ​# run reset and shutdown script 
-   ​# blink an LED +  printf ">>>>>>>>​ Starting ​shutdown aund reset button on GPIO 22\n"​ 
-   ​printf "Starts ​blinking LED on GPIO 27\n"​ +  /​home/​pi/​paper-duino-pi/​shutdownbutton_hat.py &  
-   ​/​home/​pi/​paper-duino-pi/​blink_hat.py &+   
 +  ​# blink an LED 
 +  printf ">>>>>>>>​ Starting ​blinking LED on GPIO 27\n"​ 
 +  /​home/​pi/​paper-duino-pi/​blink_hat.py & 
 To save and leave press: CTRL+O, Enter, CTRL+X\\ To save and leave press: CTRL+O, Enter, CTRL+X\\
 Reboot: Reboot:
Line 75: Line 95:
 {{:​raspberry_boards:​spi-connection_202802.jpg?​400|}}\\ {{:​raspberry_boards:​spi-connection_202802.jpg?​400|}}\\
  
-   ​Raspberry Pi    |       Arduino+   ​Raspberry Pi    |       Paper-Duino-Hat
    ​======================================    ​======================================
    MOSI (GPIO 10)  |       MOSI (pin 11)    MOSI (GPIO 10)  |       MOSI (pin 11)
Line 82: Line 102:
    ​RST ​ (GPIO 25)  |       Reset    ​RST ​ (GPIO 25)  |       Reset
    ​GND ​            ​| ​      GND    ​GND ​            ​| ​      GND
-   ​3.3V ​           |       3,3V+   ​3.3V ​           |       5V
  
 Run on the following commands:\\ Run on the following commands:\\
Line 98: Line 118:
  
 ---- ----
 +==== License ====
 +
 +The Paper-Duino-Hat was designed by **Wolfgang Spahn** 2012-16.\\
 +It is licensed under a [[http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"​|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].
 +
 +<​html>​
 +<a rel="​license"​ href="​http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"><​img alt="​Creative Commons License"​ style="​border-width:​0"​ src="​https://​i.creativecommons.org/​l/​by-nc-sa/​4.0/​88x31.png"​ /></​a> ​
 +</​html>​
 +
 +----
 +