Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
paper_synth:dc-dc_0512_converter [2015/02/24 18:33]
admin
paper_synth:dc-dc_0512_converter [2022/02/10 22:19] (current)
admin [License]
Line 1: Line 1:
----- +===== DC-DC 5Vto2x12V Converter Board =====
-**DC-DC 5Vto2x12V Converter Board** +
-----+
  
 {{ :​paper_synth:​dc-dc_0512_converter_and_ps100.jpg?​400 |}} {{ :​paper_synth:​dc-dc_0512_converter_and_ps100.jpg?​400 |}}
Line 7: Line 5:
 An USB powerd DC-DC Converter that provides +12V and -12V. It's based on the RECOM REC1.5-0512DR/​X1 you can by for example at [[http://​www.pollin.de/​shop/​dt/​NzA3ODQ2OTk-/​Stromversorgung/​Spannungswandler/​DC_DC_Wandler/​DC_DC_Wandler_RECOM_REC1_5_0512DR_X1.html|Pollin.de]]. The board has two control LEDs. Both are 2V, 1mA Low Current LEDs. If you use different LEDs you have to change the 10kOhm resistor. An USB powerd DC-DC Converter that provides +12V and -12V. It's based on the RECOM REC1.5-0512DR/​X1 you can by for example at [[http://​www.pollin.de/​shop/​dt/​NzA3ODQ2OTk-/​Stromversorgung/​Spannungswandler/​DC_DC_Wandler/​DC_DC_Wandler_RECOM_REC1_5_0512DR_X1.html|Pollin.de]]. The board has two control LEDs. Both are 2V, 1mA Low Current LEDs. If you use different LEDs you have to change the 10kOhm resistor.
  
-{{ :​paper_synth:​dc-dc_0512_converter.jpg?​200 |}}\\+{{:​paper_synth:​dc-dc_0512_converter.jpg?​200 |}}\\
 Instead of the USB plug the board can be powert by any 5V source, too. For example an Arduino will do the job.  Instead of the USB plug the board can be powert by any 5V source, too. For example an Arduino will do the job. 
  
 For the modification of the Mini-USB socket one have to cut the spare pins:\\ For the modification of the Mini-USB socket one have to cut the spare pins:\\
 +{{:​paper_synth:​mini-usb-socket.jpg?​200|}}\\
  
 Front:\\ Front:\\
Line 19: Line 17:
  
 ---- ----
-**Paper-PCB:**\\ +==== Paper-PCB ​==== 
-{{:​paper_synth:​dc-dc_5vto2x12v_converter_10.jpg?100|}}\\+{{:paper_synth:​dc-dc_0512_converter_21.jpg?​200|}}\\ 
 +{{:​paper_synth:​dc-dc_0512_converter_21.ai.zip|}}\\ 
 + 
 +== Older Version ==
 {{:​paper_synth:​dc-dc_5vto2x12v_converter_10.xcf.zip}} {{:​paper_synth:​dc-dc_5vto2x12v_converter_10.xcf.zip}}
  
 ---- ----
-**Datasheet:**\\+==== Datasheet ​====
 [[http://​www.pollin.de/​shop/​downloads/​D351292D.PDF| RECOM REC1.5-0512DR/​X1]]\\ [[http://​www.pollin.de/​shop/​downloads/​D351292D.PDF| RECOM REC1.5-0512DR/​X1]]\\
  
 ---- ----
-**Schematic:**\\+==== Schematic ​====
 {{:​paper_synth:​dc-dc_0512_converter_schematic.jpg?​200|}} {{:​paper_synth:​dc-dc_0512_converter_schematic.jpg?​200|}}
  
 ---- ----
-**Components:​**\\+==== Parts ====
   * RECOM REC1.5-0512DR/​X1   * RECOM REC1.5-0512DR/​X1
-  * 2 x 10kOhm ​Resistor +  * 2x 4.7 kOhm Resistor 
-  * 2 x Low Current LED (2V, 1mA+  * 2x Low Current LED (2V, 2mA
-  * 2 x 63mA fuses (fast) +  * 2x 63mA fuses (fast) 
-  * 2 x fuse holder+  * 2x fuse holder
   * Mini USB Socket   * Mini USB Socket
-  * 2x8 Pin Socket ​+  * 2x 16 Pin Sockets ​
  
 +----
 +==== License ====
 +
 +The DC-DC 5Vto2x12V Converter Board was designed by **Wolfgang Spahn** 2015-21.\\
 +It is licensed under a [[http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"​|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].
 +
 +<​html>​
 +<a rel="​license"​ href="​http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"><​img alt="​Creative Commons License"​ style="​border-width:​0"​ src="​https://​i.creativecommons.org/​l/​by-nc-sa/​4.0/​88x31.png"​ /></​a> ​
 +</​html>​
 +
 +----