Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
paper_synth:dc-dc_0512_converter [2014/08/19 19:57]
admin
paper_synth:dc-dc_0512_converter [2022/02/10 22:19] (current)
admin [License]
Line 1: Line 1:
----- +===== DC-DC 5Vto2x12V Converter Board =====
-**DC-DC 5Vto2x12V Converter Board** +
-----+
  
 {{ :​paper_synth:​dc-dc_0512_converter_and_ps100.jpg?​400 |}} {{ :​paper_synth:​dc-dc_0512_converter_and_ps100.jpg?​400 |}}
  
-An USB powerd DC-DC Converter that provides +12V and -12V. It's based on the RECOM REC1.5-0512DR/​X1 you can by for example at [[http://​www.pollin.de/​shop/​dt/​NzA3ODQ2OTk-/​Stromversorgung/​Spannungswandler/​DC_DC_Wandler/​DC_DC_Wandler_RECOM_REC1_5_0512DR_X1.html|Pollin.de]]. The board has two control LEDs. Both are 2V, 1mA Low Current LEDs. If you have diffrent ​LEDs you have to change the 10kOhm resistor.+An USB powerd DC-DC Converter that provides +12V and -12V. It's based on the RECOM REC1.5-0512DR/​X1 you can by for example at [[http://​www.pollin.de/​shop/​dt/​NzA3ODQ2OTk-/​Stromversorgung/​Spannungswandler/​DC_DC_Wandler/​DC_DC_Wandler_RECOM_REC1_5_0512DR_X1.html|Pollin.de]]. The board has two control LEDs. Both are 2V, 1mA Low Current LEDs. If you use different ​LEDs you have to change the 10kOhm resistor.
  
-{{ :​paper_synth:​dc-dc_0512_converter.jpg?​200 |}}\\ +{{:​paper_synth:​dc-dc_0512_converter.jpg?​200 |}}\\ 
-Instead of the USB plug the board can be powert by any 5V source, too. For example an Arduino ​works good+Instead of the USB plug the board can be powert by any 5V source, too. For example an Arduino ​will do the job
  
 For the modification of the Mini-USB socket one have to cut the spare pins:\\ For the modification of the Mini-USB socket one have to cut the spare pins:\\
-{{:​paper_synth:​mini-usb_socket.jpg?200|}}+{{:​paper_synth:​mini-usb-socket.jpg?200|}}\\
  
 Front:\\ Front:\\
Line 19: Line 17:
  
 ---- ----
-**Paper-PCB:**\\ +==== Paper-PCB ​==== 
-{{:​paper_synth:​dc-dc_5vto2x12v_converter_10.jpg?100|}}\\+{{:paper_synth:​dc-dc_0512_converter_21.jpg?​200|}}\\ 
 +{{:​paper_synth:​dc-dc_0512_converter_21.ai.zip|}}\\ 
 + 
 +== Older Version ==
 {{:​paper_synth:​dc-dc_5vto2x12v_converter_10.xcf.zip}} {{:​paper_synth:​dc-dc_5vto2x12v_converter_10.xcf.zip}}
  
 ---- ----
-**Datasheet:**\\+==== Datasheet ​====
 [[http://​www.pollin.de/​shop/​downloads/​D351292D.PDF| RECOM REC1.5-0512DR/​X1]]\\ [[http://​www.pollin.de/​shop/​downloads/​D351292D.PDF| RECOM REC1.5-0512DR/​X1]]\\
  
 ---- ----
-**Schematic:**\\+==== Schematic ​====
 {{:​paper_synth:​dc-dc_0512_converter_schematic.jpg?​200|}} {{:​paper_synth:​dc-dc_0512_converter_schematic.jpg?​200|}}
  
 ---- ----
-**Components:​**\\+==== Parts ====
   * RECOM REC1.5-0512DR/​X1   * RECOM REC1.5-0512DR/​X1
-  * 2 x 10kOhm ​Resistor +  * 2x 4.7 kOhm Resistor 
-  * 2 x Low Current LED (2V, 1mA+  * 2x Low Current LED (2V, 2mA
-  * 2 x 63mA fuses (fast) +  * 2x 63mA fuses (fast) 
-  * 2 x fuse holder+  * 2x fuse holder
   * Mini USB Socket   * Mini USB Socket
-  * 2x8 Pin Socket ​+  * 2x 16 Pin Sockets ​
  
 +----
 +==== License ====
 +
 +The DC-DC 5Vto2x12V Converter Board was designed by **Wolfgang Spahn** 2015-21.\\
 +It is licensed under a [[http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"​|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].
 +
 +<​html>​
 +<a rel="​license"​ href="​http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"><​img alt="​Creative Commons License"​ style="​border-width:​0"​ src="​https://​i.creativecommons.org/​l/​by-nc-sa/​4.0/​88x31.png"​ /></​a> ​
 +</​html>​
 +
 +----