Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
paper_bits:pb701_electric_intonarumori [2017/04/23 01:39]
admin [PB701 Electric Intonarumori]
paper_bits:pb701_electric_intonarumori [2020/06/11 22:13] (current)
Line 1: Line 1:
 ===== PB701 Electric Intonarumori ===== ===== PB701 Electric Intonarumori =====
-That noise board is based on a design made by Urs Gaudenz from [[https://​www.mechatronicart.ch/​|Schweizer Gesellschaft Für Mechatronische Kunst]] - thanks for that!\\ 
-I added the voltage controll and some extra funcions, like the noise on/off the boost and the mute function. 
  
-The Electric Intonarumori has an audio an an control voltage input, while building the board one has to choose between bus 1 and bus 2 for the audio input and the other bus for the control input.+The core of that noise board is the digital delay chip [[http://​www.princeton.com.tw/​Portals/​0/​Product/​PT2399_1.pdf|PT2399]]. It has some OpAmps build in to filter the sound and do the echo. In this application everything that helps to get rid of the noise of the chip itself was avoided, that leads into a self sustainable noise source.\\ 
 + 
 +The board is based on a design of the [[https://​github.com/​GaudiLabs/​ChaosLooper|Chaos Looper]] by [[http://​www.gaudi.ch/​GaudiLabs/?​page_id=50|Urs Gaudenz]] from Gaudi Labs and from the [[https://​www.mechatronicart.ch/​|Schweizer Gesellschaft Für Mechatronische Kunst]] - thanks for that!\\ 
 +I added the voltage control of the delay and some extra functions, like the noise on/off, the boost and the mute function to the circuit.\\ 
 + 
 +The "​echo"​ could be changed with a potentiometer,​ the "​delay"​ with CV (0 to 5V) or with a potentiometer. An other Low Pass filter could be changed with the third potentiometer.\\ 
 + 
 +The Electric Intonarumori has an audio and an control voltage input, while building the board one has to choose between bus 1 and bus 2 for the audio input and one has to use the other bus for the control input.\\ 
 + 
 +The board is an homage and is named after the instrument "​Intonarumori"​ of the Italian Futurist, painter, composer and the author of the manifesto The Art of Noises, [[https://​en.wikipedia.org/​wiki/​Luigi_Russolo|Luigi Russolo]].\\ 
 + 
 +---- 
 +==== Schematic ==== 
 +{{:​paper_bits:​schem_el_intonarumori_pb701_tst.jpg?​400|}}\\ 
 +Thanks to [[http://​taymurstreng.de/​|Taymur Streng]] for the reverse engineering of the circuit, I never manged to make any schematics of it.\\
  
 ---- ----
Line 21: Line 33:
   * 1x 20 kOhm   * 1x 20 kOhm
   * **Capacitors:​**   * **Capacitors:​**
-  * 1x 4.7 nF (foil) 
   * 1x 1 nF (foil)   * 1x 1 nF (foil)
 +  * 1x 4.7 nF (foil)
   * 1x 39 nF (Foil)   * 1x 39 nF (Foil)
   * 5x 100 nF (foil)   * 5x 100 nF (foil)
Line 32: Line 44:
   * digital delay PT 2399   * digital delay PT 2399
   * optocoupler TLP521   * optocoupler TLP521
 +  * 1x LED
   * **Mechanical:​**   * **Mechanical:​**
   * 1x IC socket, 16 pin   * 1x IC socket, 16 pin
Line 46: Line 59:
  
 ---- ----
-~~socialite:icon facebook twitter googleplus reddit tumblr~~+==== License ==== 
 + 
 +The PB701 Electric Intonarumori was designed by **Wolfgang Spahn**, 2017-20.\\ 
 +It is licensed under a [[http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"​|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]]. 
 + 
 +<​html>​ 
 +<a rel="​license"​ href="​http://​creativecommons.org/​licenses/​by-nc-sa/​4.0/"><​img alt="​Creative Commons License"​ style="​border-width:​0"​ src="​https://​i.creativecommons.org/​l/​by-nc-sa/​4.0/​88x31.png"​ /></​a>​  
 +</​html>​
  
 ---- ----