This is an old revision of the document!


== Programming Board ================================


That board can be used together with an AVR Programmer, or the Paper USBasp for burning bootloader or programming Atmega8, 126 or 328 chips.



== Paper-PCB ============================================

programming_board_11_pub.xcf.zip

== Components ===========================================

  • IC socket, 28 pin
  • 4 loe current LEDs red, green, yellow
  • 2 capacitors 100nF
  • 2 capacitors 22pF
  • resistors: 4x 2kOhm, 2x 1kOhm, 1x 10kOhm
  • 10 pin socket
  • 6 pins

===========================================================