Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
arduino_clones:bootloader [2012/09/23 21:23]
admin
— (current)
Line 1: Line 1:
-**== Burning the Bootloader ==============================** 
  
-For burning the bootloader you need to connect the following pins on your Paperduino-UNO with your ISP programmer (in-system programmer):​ 
-  * 11 - MOSI 
-  * 12 - MISO 
-  * 13 - SCK 
-  * Reset 
-  * Ground 
-  * + 5V 
-After connecting the programmer to your computer select in the Arduino IDE in Tools/​Programmer your programmer and than klick Tools/Burn Bootloader. 
- 
-**== With an AVR ISP programmer ===========================** 
- 
-{{ :​arduino_clones:​isp_adapter.jpg?​direct&​300 |}} 
- 
-On the foto you see the ISP programmer with an ISP adapter board. But you could also build your own modified wire like that on the [[http://​arduino.cc/​en/​Hacking/​MiniBootloader|Mini Bootloader project]]. Anyway here are the connection of an original ISP header.\\ 
-{{:​arduino_clones:​isp-header.jpg?​nolink|}} 
- 
-Cause my ISP programmer has a different protokoll as the originale AVR-ISP programmer I had to modifie the file: 
-**programmers.txt**\\ 
-in that folder(on Linux):\\ 
-**/​usr/​share/​arduino/​hardware/​arduino**\\ 
-The third line has to change to:\\ 
-**avrisp.protocol=stk500v1**\\ 
- 
-**== With a Paperduino-UNO =================================** 
- 
-The Paperduino-UNO was designed for cloneing and that's why you can use your Paperduino-UNO fot burning bootloder, too. Just load the ArduinoISP - in the examples - on your Paperduino-UNO. After that, **turn off the auto reset by removeing the auto reset jumper**. And than connect the pins like that: 
-  * 13 to 13 
-  * 12 to 12 
-  * 11 to 11 
-  * 10 to Reset 
-  * Ground to Ground 
-  * +5V to +5V 
-... and than burn! 
- 
-{{ :​arduino_clones:​paperduino-uno_as_isp_adapter_wspahn.jpg?​direct&​300 |}} 
- 
-**===========================================================**