The Paperduino-Duemillenova is a Arduino Duemilanove clone and is made with a Paper-PCB. For the USB to Serial adapter a modified Arduino-MiniUSB is used (one extra pin at DTR):

To burn the bootloader one need a modified ISP connector.

Paperduino-Duemilanove_v1.3

Here one finds the original schematic.

• Atmega328 or Atmega168 with IC socket
• 2 lowcurrent LEDs
• voltage converter 78M05
• crystal 16MHz
• 2 elkos 100µF
• 4 capacitors 100nF
• 2 capacitors 22pF
• diode 1N4007
• resistors: 4x 1kOhm, 1x 10kOhm
• reset button
• header
• jumper

The Paperduino-Duemilanove was designed by Wolfgang Spahn 2011.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.