Table of Contents

Confetti 116 Chua's Diode

That's an other Chua's Diode board for the analog computer Confetti.
With the jumper set one can connect the output to the common ground, if no jumper is used one can use the output connector instead.
In combination with the Confetti101 Gyrator one can build a Chua's Oscillator.


Analog Computing 01 - Chua's Circuit


Paper PCB


confetti116_chua_s_diode_ii_01.zip


Parts

To build this board one needs a copper stripe protoboard (1/6 of the 16x10cm board), a paper print out (1:1) and some copper wire for the bridges.


License

The Confetti116 Chua Diode was designed by Wolfgang Spahn 2020.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License