Table of Contents

Confetti101 Gyrator

That's a gyrator board for the analog computer Confetti.
With the jumper set one can connect the output to the common ground, if no jumper is used one can use the output connector instead.
Together with the Confetti102 Chua Diode one can build a Chua's Oscillator.


Analog Computing 01 - Chua's Circuit


Paper PCB


confetti101_gyrator_03_15mh.zip


Parts

To build this board one needs a copper stripe protoboard (1/6 of the 16x10cm board), a paper print out (1:1) and some copper wire for the bridges.


License

The Confetti101 Gyrator was designed by Wolfgang Spahn 2015-20.
It is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License