==== Programming Board ==== {{ :avr_bootloader:paper_usbasp_-_programmer_board_1264.jpg?460 |}} That board can be used together with an AVR Programmer, or the [[avr_bootloader:paper_usbasp|Paper USBasp]] for burning bootloader or programming Atmega8, 126 or 328 chips. Front: {{:avr_bootloader:programmer_board_front_1269.jpg?200|}} Back: {{:avr_bootloader:programmer_board_back_1270.jpg?200|}} ---- ==== Paper-PCB ==== {{:avr_bootloader:programming_board_11_pub-stripes.jpg?200|}}\\ {{:avr_bootloader:programming_board_11_pub.jpg?200|}}\\ {{:avr_bootloader:programming_board_11_pub.xcf.zip|}}\\ ---- ==== Parts ==== * IC socket, 28 pin * 4 loe current LEDs red, green, yellow * 2 capacitors 100nF * 2 capacitors 22pF * resistors: 4x 2kOhm, 2x 1kOhm, 1x 10kOhm * 10 pin socket * 6 pins ---- ==== License ==== The Programming Board was designed by **Wolfgang Spahn** 2013.\\ It is licensed under a [[http://creativecommons.org/licenses/by-nc-sa/4.0/"|Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License]].

----